Steel Tape
Use for measuring and positioning
electrical devices and etc. (On the wall and on the ceiling.)
Wednesday, July 23, 2014
A.C. VOLT-OHM-AMMETER
A.C. VOLT-OHM-AMMETER
This tester is designed to read 120,
240, 480 and 600 volts. And it can also check for both ampere and continuity.
Tester
Tester
Testers are used for checking
continuity, voltage, ampere, ohms and troubleshooting faulty electronics,
appliances and etc.
Light Tester/Voltage Tester
Light Tester/Voltage Tester
This tester can be used for checking the
voltage of the outlets, circuit breakers, fusebox, cutout box, and etc. The led
of it will turn on once you put one of its leg on the hot wire and the other
leg on the neutral wire (If the source has a power) . This tester can only take
240 to 600 volts only.
Friday, July 18, 2014
FLAT SCREW DRIVER
FLAT SCREW DRIVER
PHILIP SCREW DRIVER
SREW DRIVERS
Friday, July 4, 2014
Long Nose Plier
Flat Long Nose
Type of plier use for cutting, tapping, splicing small cables and for holding wires to be joined and it comes in a number of sizes. 6-8 inch size is used for looping wire around screw terminals. (I use it with a Lineman’s Plier to joint, splice, and to tap wires.)
Side Cutting Plier
Side Cutter
Type of plier use for cutting wires from 10 to 18 wire and cutting small nails.
Lineman's Plier
Lineman’s Plier
The basic tools for electrician. It is used for splicing, tapping, cutting , joining wires and cables. Grooved jaws are used for twisting wires together and hold wires firmly.
Thursday, January 30, 2014
Simple Tools for Building Wiring Installation
These are just the basic tools for Electrician in Building Wiring Installation. We often use them in our Home Electrical Devices.
Subscribe to:
Posts (Atom)