Steel Tape

Steel Tape

Use for measuring and positioning electrical devices and etc. (On the wall and on the ceiling.)

A.C. VOLT-OHM-AMMETER

A.C. VOLT-OHM-AMMETER

This tester is designed to read 120, 240, 480 and 600 volts. And it can also check for both ampere and continuity.

Tester

Tester

Testers are used for checking continuity, voltage, ampere, ohms and troubleshooting faulty electronics, appliances and etc.

Light Tester/Voltage Tester

Light Tester/Voltage Tester

This tester can be used for checking the voltage of the outlets, circuit breakers, fusebox, cutout box, and etc. The led of it will turn on once you put one of its leg on the hot wire and the other leg on the neutral wire (If the source has a power) . This tester can only take 240 to 600 volts only.

FLAT SCREW DRIVER

FLAT SCREW DRIVER

Youtube Channel: iwantolearn
Facebook Page: www.facebook.com/iwantolearn
Google+ Type of screw driver with a flat edge use for tightening and loosening screws with a minus sign-like (-) on the head

PHILIP SCREW DRIVER

Screw Driver
Youtube Channel: iwantolearn
Facebook Page: www.facebook.com/iwantolearn
Google+ The type of screw driver with a cross edge use for tightening and loosening screws w/ the head called Philip Screw or a plus sign-like (+) on the head.

SREW DRIVERS

Screw Driver

Youtube Channel: iwantolearn
Facebook Page: www.facebook.com/iwantolearn
Google+

Use for tightening and loosening screws, nuts and bolts.

Long Nose Plier

Flat Long Nose

Youtube Channel: iwantolearn Facebook Page: www.facebook.com/iwantolearn Google+
Type of plier use for cutting, tapping, splicing small cables and for holding wires to be joined and it comes in a number of sizes. 6-8 inch size is used for looping wire around screw terminals. (I use it with a Lineman’s Plier to joint, splice, and to tap wires.)

Side Cutting Plier

Side Cutter

Youtube Channel: iwantolearn Facebook Page: www.facebook.com/iwantolearn Google+

Type of plier use for cutting wires from 10 to 18 wire and cutting small nails.

Lineman’s Plier

Youtube Channel: iwantolearn Facebook Page: www.facebook.com/iwantolearn Google+

The basic tools for electrician. It is used for splicing, tapping, cutting , joining wires and cables. Grooved jaws are used for twisting wires together and hold wires firmly.